Powermax85
The premier system for cutting 25 mm (1″), the Powermax85® has the same features and options as the Powermax65®, but with more power from an output current of 85 amps. Designed to maximize uptime and productivity, the system offers the latest technological innovations, such as Smart Sense™ technology to automatically adjust the gas pressure. With a variety of Duramax™ torch styles, operators can easily select exactly the right tool for the job: hand cutting or gouging, portable automation, X-Y table, and robotic cutting or gouging.
| Input voltages | CSA | 200 – 480 V, 1-PH, 50/60 Hz 200 – 600 V, 3-PH, 50/60 Hz |
|---|---|---|
| CE | 380/400 V, 3-PH, 50/60 Hz | |
| Input Current @12.2 kW | CSA | 200/208/240/480 V, 1-PH, 70/68/58/29 A 200/208/240/480/600 V, 3-PH, 42/40/35/18/17 A |
| CE | 380/400 V, 3-PH, 20.5/19.5 A | |
| Output current | 25 – 85 A | |
| Rated output voltage | 143 VDC | |
| Duty cycle @ 40°C (104°F) | CSA | 60% @ 85 A, 230 – 600 V, 3-PH 60% @ 85 A, 480 V, 1-PH 50% @ 85 A, 240 V, 1-PH 50% @ 85 A, 200 – 208 V, 3-PH 40% @ 85 A, 200 – 208 V, 1-PH 100% @ 66 A, 230 – 600 V, 1/3-PH |
| CE | 60% @ 85 A, 380/400 V, 3-PH 100% @ 66 A, 380/400 V, 3-PH |
|
| Open circuit voltage (OCV) | CSA | 305 VDC |
| CE | 270 VDC | |
| Dimensions with handles | 500 mm (19.7″) D; 234 mm (9.2″) W; 455 mm (17.9″) H | |
| Weight with 7.6 m ( 25′) torch | CSA | 32 kg (71 lbs) |
| CE | 28 kg (62 lbs) | |
| Gas Supply | Clean, dry, oil-free air or nitrogen | |
| Recommended gas inlet flow rate / pressure |
Cutting: 189 l/min (400 scfh, 6.7 scfm) @ 5.9 bar (85 psi) Gouging: 212 l/min (450 scfh, 7.5 scfm) @ 4.8 bar (70 psi) |
|
| Input power cable length | 3 m (10′) | |
| Power supply type | Inverter – IGBT | |
Engine-driven generator operation
| Engine drive rating | System output current | Performance (arc stretch) |
|---|---|---|
| 20 kW | 85 A | Full |
| 15 kW | 70 A | Limited |
| 15 kW | 60 A | Full |
| 12 kW | 60 A | Limited |
| 12 kW | 40 A | Full |
| 8 kW | 40 A | Limited |
| 8 kW | 30 A | Full |
Cut capacity
| Capacity | Thickness | Cut speed |
|---|---|---|
| Cutting | ||
| Recommended | 25 mm (1″) | 500 mm/min (20 ipm) |
| 32 mm (1-1/4″) | 250 mm/min (10 ipm) | |
| Severance (hand cutting) | 38 mm (1-1/2″) | 125 mm/min (5 ipm) |
| Pierce * | 20 mm (3/4″) | |
* Pierce rating for handheld use or with automatic torch height control
| Capacity | Metal removal rate | Groove profile |
|---|---|---|
| Gouging | ||
| Typical gouge | 8,8 kg/hr (19.5 lbs/hr) |
5,8 mm D x 7,1 mm W (0.23″ D x 0.28″ W) |
Production cut chart
| Material | Thickness | Current | Production cut speed * | ||
|---|---|---|---|---|---|
| inches | mm | amps | ipm | mm/min | |
| Mild steel | 1/4 | 6 | 85 | 160 | 4400 |
| 1/2 | 12 | 85 | 56 | 1600 | |
| 3/4 | 20 | 85 | 29 | 680 | |
| Stainless steel | 1/4 | 6 | 85 | 164 | 4600 |
| 1/2 | 12 | 85 | 48 | 1400 | |
| 3/4 | 20 | 85 | 24 | 570 | |
| Aluminum | 1/4 | 6 | 85 | 172 | 4900 |
| 1/2 | 12 | 85 | 68 | 1930 | |
| 3/4 | 20 | 85 | 37 | 880 | |
*Production cut speeds are the result of Hypertherm’s laboratory testing.
Production speeds are approximately 80% of maximum. For optimum cut quality, cutting speeds may vary based on different cutting applications. Refer to the operator manual for more details.
Standard configurations
Below are the standard system configurations, which include a power supply, torch and work cable.
| 75° hand torch | 75° and 15° hand torches | |||||
|---|---|---|---|---|---|---|
| Power supplies | Voltage configurations | 7.6 m (25′) | 15.2 m (50′) | 7.6 m (25′) | 15.2 m (50′) | |
| with Eliminizer filter and cover | without remote pendant | |||||
| Standard power supply | 200-600 V CSA | 087108 | 087111 | 087109 | ||
| 400 V CE | 087117 | 087120 | 087118 | |||
| Power supply with CPC port and voltage divider | 200-600 V CSA | 087113 | 087114 | 087144 | 087145 | |
| 400 V CE | 087122 | 087123 | 087146 | 087147 | ||
| 180° full-length machine torch | 180° full-length machine torch and 75° hand torch | |||||||
|---|---|---|---|---|---|---|---|---|
| Power supplies | Voltage configurations | 7.6 m (25′) | 15.2 m (50′) | 7.6 m (25′) | ||||
| with remote pendant | without remote pendant | with I/O cables (no pendant) |
with remote pendant | without remote pendant | with I/O cables (no pendant) |
with remote pendant | ||
| Power supply with CPC port and voltage divider | 200-600 V CSA | 087115 | 087132 | 087116 | 087137 | 087135 | ||
| 400 V CE | 087124 | 087131 | 087125 | 087136 | ||||
| Power supply with CPC port, voltage divider, and serial port | 200-600 V CSA | 087138 | 087140 | |||||
| 400 V CE | 087139 | 087141 | ||||||
Custom configurations
Select a power supply, torch, torch consumable kit, work cable and other components.
Power supply options
| Standard power supply | Power supply with CPC port and selectable voltage ratio | Power supply with CPC port, selectable voltage ratio and serial interface port (RS-485) | |
|---|---|---|---|
| 200-600 V CSA | 087067 | 087104 | 087105 |
| 400 V CE | 087068 | 087106 | 087107 |
Starter kit consumable options
(View related consumables section for all consumable kit options )
| Handheld | Mechanized | Mechanized with ohmic retaining cap | |
|---|---|---|---|
| Kit | 228966 | 228967 | 228968 |
Duramax torch options
(For Duramax Hyamp torch part numbers, including long torches, see the Powermax125)
| Hand torches | Machine torches | Robotic torches | |||||
|---|---|---|---|---|---|---|---|
| Cable length | 75° | 15° | 180° | Mini 180° | 45° | 90° | 180° |
| 4,5 m (15′) | 059476 | 059481 | |||||
| 7,6 m (25′) | 059473 | 059470 | 059477 | 059482 | 059464 | 059465 | 059466 |
| 10,7 m (35′) | 059478 | 059483 | |||||
| 15,2 m (50′) | 059474 | 059471 | 059479 | 059484 | |||
| 22,8 m (75′) | 059475 | 059472 | 059480 | ||||
Cable options
| Work cables | Control cables | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Cable length | Hand clamp | C-style clamp | Ring terminal | Remote pendant | CNC, spade connector, divided voltage | CNC, spade connector, no divided voltage | CNC, D-sub connector, divided voltage | RS-485 Serial comm, unterminated | RS-485 Serial comm, D-sub |
| 7,6 m (25′) | 223035 | 223203 | 223209 | 128650 | 228350 | 023206 | 223048 | 223236 | 223239 |
| 15,2 m (50′) | 223034 | 223204 | 223210 | 128651 | 228351 | 023279 | 123896 | 223237 | 223240 |
| 22,8 m (75′) | 223033 | 223205 | 223211 | 128652 | |||||
Based on 0 reviews
Be the first to review “Powermax85”
Related products
-
HYPERTHERM, Taiere cu plasma cu aer
Powermax105
The Powermax105® plasma system has the duty cycle and performance needed for tough industrial cutting and gouging jobs. Delivering superior cut capabilities on 32 mm (1-1/4″) thick metals, it also offers the latest technological innovations, such as Smart Sense™ technology to automatically adjust the gas pressure. Seven Duramax™ torch styles provide versatility for hand cutting, portable automation, X-Y table cutting, and robotic cutting and gouging.
SKU: n/a -
HYPERTHERM, Taiere cu plasma cu aer
Powermax30 XP
The Powermax30® XP is a highly portable plasma cutter designed to handle a wide range of jobs. A unique “two-in-one” design provides high-power capability for thick metal cutting, as well as FineCut® consumables for detailed, thin metal cutting. In addition to cutting any electrically conductive metal, such as mild steel, stainless steel, or aluminum, this 30-amp plasma cutter can also gouge metal. The Powermax30 XP boasts dual-voltage capabilities. In addition to 240 V, you can plug it into a standard household socket and use as a 120 V plasma cutter.
SKU: n/a -
HYPERTHERM, Taiere cu plasma cu aer
Powermax45 XP
The Powermax45® XP delivers increased cut capacity – up to 16 mm (5/8″) metal – as well as faster cut speeds, and automatic gas adjustment for quick, simple setup and operation. Duramax® Lock torches support handheld and mechanized cutting of a wider range of metal thicknesses, along with precision gouging such as spot weld removal, and marking capabilities.
SKU: n/a -
HYPERTHERM, Taiere cu plasma cu aer
Powermax30 Air
Despite its small size, the Powermax30® AIR delivers big performance. This small air plasma cutter — the smallest, lightest handheld plasma cutter in its class — includes its own built-in air compressor. That’s right, it’s a small plasma cutter with a built-in compressor so you can use the Powermax30 AIR anywhere there’s single-phase power. Just plug it in, attach the work clamp and you’re ready to cut. It’s even dual-voltage. You can use it as a 120 V plasma cutter or at 240 V. Regardless of which power input (120 V or 240 V) you choose, we think you’ll agree the Powermax30 AIR is the best plasma cutter with built-in compressor available today.
SKU: n/a
There are no reviews yet.